Bifurcation analysis of bistable oscillator dynamics for human hair-cell bundle structures by mapping the Floquet multipliers, NONLINEAR DYNAMICS , 제112권(집) , 제13호 , PP.1~16 , 2024.07.01

Design optimization of buttress type premium casing connection by modifying lower corner radius of stab flank, Scientific Reports , 제14권(집) , 제8018호 , PP.1~20 , 2024.04.05

System Modeling and Simulation for Investigating Dynamic Characteristics of Geared Symmetric System Based on Linear Analysis, Symmetry-Basel , 제15권(집) , 제1904호 , PP.1~34 , 2023.10.11

Indirect force estimation method under spectrally varying and amplitude-sensitive conditions by estimating the effective fluid path parameter, JOURNAL OF SOUND AND VIBRATION , 제557권(집) , 2023.08.04

Harnessing adaptive bistable stiffness of hair‑cell‑bundle structure for broadband vibration applications, Scientific Reports , 제13권(집) , 제10750호 , PP.1~11 , 2023.07.03

Structural Optimization of a Circular Symmetric Threaded Connection System Based on the Effect of the Upper Stabbing Flank Corner Radius, Symmetry-Basel , 제14권(집) , 제12호 , 2022.12.01

Examination of sub‑harmonic responses along with various initial conditions induced by multi‑staged clutch damper system, Scientific Reports , 제12권(집) , 제1호 , PP.1~12 , 2022.07.05

Investigation of complex nonlinear dynamic behaviors observed in a simplified driveline system with multistage clutch dampers, Scientific Reports , 제12권(집) , 제1호 , 2022.06.14

Sub‐Harmonic Response Analysis of Nonlinear Dynamic Behaviors Induced by Piecewise‐Type Nonlinearities in a Torsional Vibratory System, Applied Sciences-Basel , 제12권(집) , 제4호 , PP.1~14 , 2022.02.10

Stability and bifurcation analysis of super- and sub-harmonic responses in a torsional system with piecewise-type nonlinearities, Scientific Reports , 제11권(집) , 제1호 , PP.23601~ , 2021.12.08

Design optimization of OCTG premium connection system based on the effect of stabbing flank angle, Journal of Mechanical Science and Technology , 제35권(집) , 제2호 , PP.545~561 , 2021.02.01

Harnessing the bilinear nonlinearity of a 3D printed biomimetic diaphragm for acoustic sensor applications, MECHANICAL SYSTEMS AND SIGNAL PROCESSING , 제116권(집) , PP.710~724 , 2019.02.01

Modified LMS Strategies Using Internal Model Control for Active Noise and Vibration Control Systems, Applied Sciences-Basel , 제8권(집) , 제6호 , PP.1~16 , 2018.06.20

Enhanced adaptive filtering algorithm based on sliding mode control for active vibration rejection of smart beam structures, Applied Sciences-Basel , 제7권(집) , 제7호 , PP.7501~75023 , 2017.07.24

Frequency response function of motors for switching noise energy with a new experimental approach, Journal of Mechanical Science and Technology , 제31권(집) , 제6호 , PP.2671~2677 , 2017.06.05

Effect and feasibility analysis of the smoothening functions for clearance-type nonlinearity in a practical driveline system, NONLINEAR DYNAMICS , 제85권(집) , 제3호 , PP.1651~1664 , 2016.04.20

Gear rattle analysis of a torsional system with multi-staged clutch damper in a manual transmission under the wide open throttle condition, Journal of Mechanical Science and Technology , 제30권(집) , 제3호 , PP.1003~1019 , 2016.03.12

Analysis of vibro-impacts in a torsional system under both wide open throttle and coast conditions with focus on the multi-staged clutch damper, Journal of Mechanical Science and Technology , 제29권(집) , 제12호 , PP.5167~5181 , 2015.12.12

Effect of various excitation conditions on vibrational energy in a multi-degree-of-freedom torsional system with piecewise-type nonlinearities, Energies , 제8권(집) , 제10호 , PP.10861~10882 , 2015.09.29

Vibro-impact energy analysis of a geared system with piecewise-type nonlinearities using various parameter values, Energies , 제8권(집) , 제8호 , PP.8924~8944 , 2015.08.21

Dynamic vibratory motion analysis of a multi-degree-of-freedom torsional system with strongly stiff nonlinearities, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , 제229권(집) , 제8호 , PP.1399~1414 , 2015.06.29

Step-length control analysis with a multi-staged clutch damper model in a torsional vibration problem using harmonic balance method, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , PP.1~10 , 2015.05.07

Examination of super-harmonics in a multi-degree of freedom nonlinear vibration isolation system: Refined models and comparison with measurements, MECHANICAL SYSTEMS AND SIGNAL PROCESSING , 제48권(집) , 제1호 , PP.368~387 , 2014.10.03

Nonlinear frequency response analysis of a multistage clutch damper with multiple nonlinearities, Journal of Computational and Nonlinear Dynamics , 제9권(집) , 제3호 , PP.03100~03100 , 2014.07.01

Nonlinear analysis of vibro-impacts for unloaded gear pairs with various excitation and system parameters, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME , 제136권(집) , 제3호 , PP.03101~03101 , 2014.06.01

Effect of the multi-staged clutch damper characteristics on transmission gear rattle under two engine conditions, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , 제227권(집) , 제9호 , PP.1273~1294 , 2013.09.01

Study on the dynamic characteristics of a manual transmission using linear models, 한국소음진동공학회논문집 , 제23권(집) , 제3호 , PP.240~248 , 2013.03.20

Estimation of interfacial forces in a multi-degree of freedom isolation system using a dynamic load sensing mount and quasi-linear models, JOURNAL OF SOUND AND VIBRATION , 제330권(집) , 제18호 , PP.4429~4446 , 2011.09.12

Indirect measurement of dynamic force transmitted by a nonlinear hydraulic mount under sinusoidal excitation with focus on super-harmonics, JOURNAL OF SOUND AND VIBRATION , 제329권(집) , 제25호 , PP.5249~5272 , 2010.12.06

Dynamic force transmitted by hydraulic mount: Estimation in frequency domain using motion and/or pressure measurements and quasi?linear models, NOISE CONTROL ENGINEERING JOURNAL , 제58권(집) , 제4호 , PP.403~419 , 2010.07.01

회전 시스템의 수학적 모델과 간소화된 시스템의 선형 특성 연구, 한국안전학회지 , 제25권(집) , 제3호 , PP.7~14 , 2010.05.24

선형적 요소 예측을 통한 비선형 시스템 동적 특성 연구, 한국기계가공학회지 , 제9권(집) , 제2호 , PP.11~19 , 2010.04.28

수동 변속기 내 기어 선형해석을 통한 동역학적 해석, 한국안전학회지 , 제22권(집) , 제5호 , PP.1~6 , 2007.10.14

회전 시스템 내 기어 동역학적 특성에 대한 이론적 해석, 한국안전학회지 , 제22권(집) , 제1호 , PP.1~6 , 2007.02.12