메뉴배경인천대학교 신소재공학과
  • 텍스트크게
  • 기본크기
  • 텍스트작게
  • 프린트
로그인
homesitemapEnglish
 

장비소개

X-ray Diffractometer : RIGAKU
Features

ㆍThis system can optimize all measurement and data processing parameters
   automatically by making a preliminary measurement. Thus, a true, fully automatic
   analysis mode can be selected.
ㆍFully automatic computer controlled goniometer and monochromator alignement,

   slit exchanger, KV-mA setting are available.
ㆍThe advanced software provides w completely user friendly communication with the

   aid of multi-windows, multi-tasking, icon, etc. using UNIX operating system.
ㆍThis system will be controlled and processed by both of work station and IBM
   compatible.
ㆍTwo wide angle goniometer system will be able to be controlled simultaneously.

Dilatometer: TMA801
Features

ㆍControl and evaluation by means of the user friendly software.
ㆍCan be used in Various atmospheres.
ㆍHigh resolution and accuracy

XRF: EX310
Features

ㆍSpectrometer detects elements present in the sample and determine their concentration.
ㆍEnergy dispersive x-ray fluorescence spectrometer system.
ㆍProvides rapid, non-destructive, multi-element determinations from the ppm to high
   weight percentage range for elements from sodium(Na) through uranium(U)
ㆍDesigned to perform measurements across a wide range of sample matrix categories -
   from homogeneous, low viscosity liquids to solids, slurries, powders, pastes,

   and thin films.
ㆍData processing system included PC based provides both DOS and Windows software.

 

MAGNETOMETER(7304)
Features

ㆍThe model 7304, 7307 an 7312 Vibrating Sample Magnetometer(VSM) Systems combine
   ease-of-use with high sensitivity and measurement speed, resulting in an instrument
   ideally suited for production test and quality control, as well as basic and applied
   materials research. Measurements of moments as small as 5 x 10-8 are possible in
   magnetic fields ranging from 0 to 2 tesla with laboratory electromagnets. The 7304,
   7307 and 7312 systems can be configured with cryostats, or high temperature oven
   options, thus permitting the measurement of magnetic moment from 2 k to 1000℃
   (1273k)

HALL Effect Measurement System
Features

ㆍMeasurement: Hall voltage, resistance, resistivity, carrier, concentration and mobility,
   magnetoresistance, and current voltage characteristics on four lead van der Pauw
   samples.
ㆍMaterials: Electronic conductors, including semiconductors, metals, and
   superconductors. Thin films or bulk materials (single crystal or polycrystalline).

   Single or multiple carrier. )

E-Beam Evaporator
Features

ㆍThis equipment must be able to perform both metallic and ceramic coating works.
ㆍA surface finish must be essentially the same as the substrate surface finish.
ㆍThe deposition must be carried out with good thickness uniformity.
ㆍAlloy coating must be produced y condensing a multi element vapor on the substrates.

Sputter
Specification

ㆍProcess chamber
ㆍVacuum pumping unit 1 set
ㆍSubstrate rotation & heating unit 1 set
ㆍSputtering gun source 3 sets
ㆍVacuum gauge controller
ㆍGas supply unit
ㆍR.F power supply
ㆍD.C power supply
ㆍFrame & control box

Spray Dryer
Main Frame

ㆍDryer chamber
ㆍAutomizer
ㆍElectric heater
ㆍSlurry pump
ㆍHot blast blower with damper
ㆍExhaust blower with damper
ㆍAir filter
ㆍAtomizer rpm detector and control panel
ㆍCyclone
ㆍGlass jar (Powder collection or equivalent)

B-H ANAIZERER, Sy8232
Features

ㆍUltra-wide measurement frequency bandwidth
ㆍDesktop size, all-in-one construction
ㆍContinuous measurement function and an extensive selection of other measuring
   functions
ㆍHigh-speed, high-precision measurement
ㆍPrinter provided as standard
ㆍGP-IB interface provided as standard
ㆍEasy-to-view 9-inch color CRT display
ㆍEasy operation with pop-up menu system
ㆍEnhanced measurement efficiency with a wide range of options

Microload simulation system
Main Frame

ㆍFree-standing, self-supported unit. Load capacity: Max. 200kgf
ㆍMinimum load control: 0.1% of full capacity
ㆍLoad resolution: 0.01% of full capacity
ㆍStrain gage type load cell: High output for better resolution and precision
ㆍSymmetrical output between tension & comp. Static overload capacity: 150% of

   rated load.
ㆍUsed for measurement and/or control of force. +/-0.15% linearity
ㆍAC servo motor and reducer Frame materials: Hardened steel
ㆍTotal stroke: 200mm
ㆍStroke resolution: 0.001mm
ㆍMin. testing velocity: 0.0005mm/min
ㆍMax. testing velocity: 1000mm/min
ㆍUpper and lower limit S/W, Adjustable test space, Manual cross head moving

   function for position

BET Surface Area Analyzer : GEMINI 237
Features

ㆍAdsorption/Desorption isotherms
ㆍSingle/multi point BET surface area
ㆍLangmuir surface area
ㆍMicropore volume/area analysis by Halsey or Harkins-Jura equation
ㆍTotal pore volume
ㆍBJH pore size/volume distribution
ㆍFully automatic operation
ㆍEasy to learn and operate with Microsoft windows version
ㆍDewar elevator automatically raise and lower the LN2 bath
ㆍData transfer through RS-232 port
ㆍSeparate analysis/degas manifolds for preventing contamination
ㆍUp to 4 analyzers can be operated simultaneously from a single computer
ㆍSimultaneous degassing of six samples for adsorption analysis
ㆍX-Y expansion to zoom the details
ㆍOverlaid on screen from graphic of different analysis

Microhardeness Tester / HMV-2000AD
Features

ㆍCabaple of testing with a low test forve and high test force.
ㆍThe load duration can be set in 1-second increments between 5 and 60sec.
ㆍSince a digimatic micrometer head is used in the feeding mechanism on the X-Y stage,
   the positional data can be digitally displayed or sent to the output port.
ㆍData processing function such as hardness scale conversion and statistical

   calculation are provided as standard.
ㆍThe result of tolerance judgment is given on the LED.

UTM : Instron 4411
Features

ㆍThis instrument should be performing tension, compression, bending, cyclic test and
   relaxation test by control console and PC.
ㆍThis instrument is equal to or exceeds all ASTM, BS, DIN, ISO, EN, AFNOR JIS and

   other international standards.
ㆍTwo- column structures.
ㆍAutoranging for simple operation and optimum data resolution should be standard.
ㆍOverload protection function should be standard.
ㆍSelf identification function for load cell and extensometer should be standard.
ㆍSafety interlock function should be standard.
ㆍShould be setting and indicators in English, Metric and S.I units.
ㆍOne -touch automatic calibration and balance for load and strain, automatic display
   ranging or load, extension and strain should be required.
ㆍInstantaneous digital speed selection, even while a test.
ㆍCycling functions for load, extension, strain should be standard.
ㆍThis instrument could be attached analog X-Y recorder.
ㆍShould be displayed load, extension, strain simultaneously.
ㆍShould be used a position-control closed-loop servo drive system.
ㆍLoad weighting accuracy is +/-0.01% of full scale or +/-0.5% of reading.
ㆍStrain measuring is +/-0.05% of full scale or +/-0.5% of reading.
ㆍOn-board digenetic should be standard.
ㆍCertified by ISO 9001 and NAMAS.

Autoclave
Features

ㆍFor chemical technology and industrial chemical processing particularly in organic,
   pharmaceutical, and petrochemical.
ㆍConvenient Bomb support and stirrer drive system.
ㆍEasy size conversion.
ㆍFloor stand Model.

4-Point Probe System, CMT
Main Frame

ㆍProbe Material: Tungsten Carbide
ㆍProbe distance: 1mm
ㆍProbe diameter: 40μR
ㆍIntensity Light Source
ㆍSample Stage Dimension: up to 21 x 150 x 41mm
ㆍWeight: 70g
ㆍProbe pressure: 800g
ㆍDust cover

Tube Furnace, KF-VG-1050
Features

ㆍAllow the degree of vacuum depending on the selection of tube and grant of pressure.
ㆍThe user can uniformly adjust the zone size by selecting the controller system.

Diffusion Furnace
Features

ㆍTemperature: 1500℃/Max
ㆍVolt: 220v 1ph
ㆍOperation Temperature: 1400℃
ㆍHeater: 1600℃/Max
ㆍInsulation: 1600℃

SAMPLE PREPARATION SYSTEM
Main Frame

ㆍ2Liter, 1000rpm, Zirconia system

Automatic Electrolytic Thinning Machine: TENOPUL3
Features

ㆍPhysical adsorption
ㆍChemical adsorption
ㆍAllowing each sample to be tested with a different gas
ㆍIn-site pretreatment of samples
ㆍSelf-calibration before every test
ㆍAutomatic control liquid nitrogen level

게시판검색
처음 이전
  • [1]
다음 마지막
하단배경영역