Augmented cooling performance in gas turbine blade tip with slot cooling, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제201권(집) , 제1호 , 2023.02.01

Enhancement of blade tip cooling with different position on tip cooling slot, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제200권(집) , 2023.01.01

Enhancement of blade tip cooling with different position on tip cooling slot, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제200권(집) , 2023.01.01

Heat transfer measurements for array jet impingement with castellated wall, JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME , 제144권(집) , 제3호 , 2022.03.01

Effect of shelf squealer tip configuration on aerothermal performance of gas turbine blade, INTERNATIONAL JOURNAL OF THERMAL SCIENCES , 제168권(집) , 2021.10.01

Unsteady hot gas ingestion through the double rim-seals of an axial gas turbine, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , 제207권(집) , 2021.10.01

Delta-winglet-pair for enhancing cooling performance of a single dimple imprinted internal channel, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제178권(집) , 2021.10.01

Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing: Effect of channel gap height, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제175권(집) , 2021.08.01

Wake effects on heat transfer from a turbine blade tip with different configurations and its corresponding shroud, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , 2021.07.01

Heat transfer from a dimple-imprint downstream of boundary-layer trip-wire, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제173권(집) , 2021.07.01

Effects of seal installation in the mid-passage gap between turbine blade platforms on film cooling, APPLIED THERMAL ENGINEERING , 제189권(집) , 2021.05.05

Efficient design of heat exchange for CFB reactors in CO2 capture system regarding geometry-induced secondary flow, ENERGY CONVERSION AND MANAGEMENT , 제235권(집) , 2021.05.01

가스터빈 블레이드 전연부 필렛 적용에 따른 유동 및 열전달 특성 분석, 대한기계학회논문집 B , 제45권(집) , 제1호 , PP.1~9 , 2021.01.31

Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , 제155권(집) , 2020.07.01

가스터빈 블레이드 전연면 내부 유로 요철 형상에 따른 열전달 특성 연구, 대한기계학회논문집 B , 제44권(집) , 제5호 , PP.281~288 , 2020.05.01

3D 프린팅을 활용한 가스터빈 고온부품 냉각 기술 개발, 기계저널 , 제60권권(집) , 제2호호 , PP.44~47 , 2020.02.01

격자 구조 유로의 냉각 성능 향상을 위한 요철 형상 연구, 대한기계학회논문집 B , 제43권(집) , 제5호 , PP.329~337 , 2019.05.01